Failure Dependence Of Semiconductor Devices On Low Temperatures
- Authors
-
-
M. R. Salem
Department of Electronic and Electrical Engineering, Faculty of Engineering, Omar Al-Mukhtar University - p. B 919 Al-Bayda - LibyaAuthor -
L. A. Talat
Department of Electronic and Electrical Engineering, College of Engineering, Omar Al-Mukhtar University - p. B 919 Al-Bayda - LibyaAuthor
-
- Keywords:
- Low Temperatures, Semiconductor Devices, Silicon wafer, Dilatation electrodes, Mechanical stability system, Density function, Distribution function
- Abstract
-
The paper studies the effect of low temperatures on the failure of power semiconductor devices. Due to the high difference of thermal coefficient between the silicon wafer and dilatation electrodes, and in some cases in the solder connecting both ; a high mechanical stress occurs and results cracks in the intermediate layers. These cracks produce big change in the reverse I -V characteristic for some devices and finally an electrical failure occurs. There are different methods used for location of failure, this study uses a simple method based on mechanical stability of the system. Different sets were chosen randomly from different groups of production. The samples were put in the cryostat and the temperature was adjusted from 0 °C to - 196 °C to determine the failure sample and its corresponding temperature. The data collected experimentally was analyzed using probability density function and cumulative probability distribution function. The results indicate that there are a strong correlation between the critical temperature and the type, construction of system as well as the quality of the technological processes during the manufacturing of semiconductor devices.
- Downloads
-
Download data is not yet available.
- Downloads
- Published
- 1998-12-31
- Issue
- Vol. 5 No. 1 (1998)
- Section
- Articles
- License
-

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright of the articles Published by Almukhtar Journal of Science (MJSc) is retained by the author(s), who grant MJSc a license to publish the article. Authors also grant any third party the right to use the article freely as long as its integrity is maintained and its original authors and cite MJSc as the original publisher. Also, they accept the article remains published by the MJSc website (except in the occasion of a retraction of the article).
How to Cite
Similar Articles
- Ibraheim A. El-Sarsour, Mohammad A. Kasem, Saber E. Mansour, Adsorption of Some Heavy Metal Ions onto Dernah's Clay , Al-Mukhtar Journal of Sciences: Vol. 20 No. 1 (2008)
- Rasmia H. Feituri, Hanan El Megasbi, Mariam M. El maadani , Amal Khazm, Aortic Root Dilatation in Children and Adolescents At Al-Hawary General Hospital, & National Benghazi Cardiac Center -Libya , Al-Mukhtar Journal of Sciences: Vol. 36 No. 4 (2021)
- Abdelhamid M. Hamad , Effect of explant length and density on in vitro shoot formation and growth of Pineapple (Ananas comosus L. Merr.) cv Moris , Al-Mukhtar Journal of Sciences: Vol. 32 No. 2 (2017)
- Tawfek M. Barakat, G. Shawky, Mohamed A.M. Ragab, Postpartum Uterine Bacterial Contamination without Clinical signs in Relation to Reproductive Performance in Dairy Cows , Al-Mukhtar Journal of Sciences: Vol. 34 No. 1 (2019)
- Salah M Hamad, GIS-Based Groundwater Information System (GWIS) of Al Waseetah area: Case study , Al-Mukhtar Journal of Sciences: Vol. 34 No. 1 (2019)
- Faraj.A. Abdunani, Ahmed.A. Shletiet , Roughness in Membership Continuous Function , Al-Mukhtar Journal of Sciences: Vol. 36 No. 3 (2021)
- Ahmed Y. Habel, Kamal A. Abdalgader, Atia E. Aldifry, The Impact of Calcium Carbonate on the Bulk Density of selected Libyan Calcareous Soils in Al Jabal Al Al-kdhar Region , Al-Mukhtar Journal of Sciences: Vol. 30 No. 1 (2015)
- Abdel-Wahab Ramadan Obaia, Effect of lighting systems on broiler performance , Al-Mukhtar Journal of Sciences: Vol. 26 No. 1 (2011)
- Fouad A Zein Elarab, Abdassalam B Aldaikh, Green's Function Method for Ordinary Differential Equations , Al-Mukhtar Journal of Sciences: Vol. 28 No. 1 (2013)
- Ahmed. F. Elmisteri, Abdelbaset R. H. Midawi, Farag M Shuaeib, Finite Element Simulation of the Instrumented Indentation Test to Estimate the Mechanical Properties for ASTM516-G70 and AISI1010 steels , Al-Mukhtar Journal of Sciences: Vol. 34 No. 3 (2019)
You may also start an advanced similarity search for this article.











