Production of High-Quality Tomato Seedlings in the Open Field Nurseries
- Authors
-
-
Fatma A. H. Mohamed
Department of Horticulture, Faculty of Agriculture, Omar Al-Mukhtar University, LibyaAuthor -
Fayrouz A. A. Buojaylah
Department of Horticulture, Faculty of Agriculture, Omar Al-Mukhtar University, Libya.Author -
Alsunousi S. O. Masoud
Horticulture Department, Faculty of Agriculture, Omar Al-Mukhtar University, Libya.Author
-
- Keywords:
- Planting distances, Seed rates, Production and Quality, Dry weight, Density
- Abstract
-
The aim of the study is to produce tomatoes seedlings with good characteristics for summer and fall seedlings seasons in field nurseries by investigating three plant distances (10, 15, 20 cm), inaddition to scatteringand two levels of seed rate (100 and 150% of the recommended rates).The experiment was carried out using completely random plots using split plot designs in three replications, and the levels of each factor were randomly distributed within the plots withcultivation of two seedbeds. Planting tomato seedlings at a 20 cm distance can improve tomato seedlings' growth in open field nurseries. Finally, more researches are needed to determine the optimal seed rates as well as planting distances in open field nurseries production under Al-Jabal Al-Khader conditions.
- Downloads
-
Download data is not yet available.
- References
-
Balliu, A., MarŠić, N., & Gruda, N. (2017). Seedling production. Good Agricultural Practices for Greenhouse Vegetable Production in the South East European Countries—Principles for Sustainable Intensification of Smallholder Farms, 189-206.
Barary, M., Mazaheri, D., & Banai, T. (1996). The effect of row and plant spacing on the growth and yield of chickpea (Cicer arietinum L.). Aus J Exp Agric, 34, 421-426.
Berhane, S., Hayelom, B., Gebremeskel, G., & Kasaye, A. (2016). Determination of planting spacing for improved yield and yield components of Dekoko (Pisum sativum var. abyssinicum) at Raya Valley, Northern Ethiopia. African Journal of Plant Science, 10(8), 157-161.
Bharathi, P., & Ravishankar, M. (2018). Vegetable nursery and seedling management guide for South and Central India.
Brazaitytė, A., Duchovskis, P., Urbonavičiūtė, A., Samuolienė, G., Jankauskienė, J., Sakalauskaitė, J., Šabajevienė, G., Sirtautas, R., & Novičkovas, A. (2010). The effect of light-emitting diodes lighting on the growth of tomato transplants. Zemdirbyste-Agriculture, 97(2), 89-98.
Elattir, H. (2002). Plant density effects on processing tomato grown in Morocco. VIII International Symposium on the Processing Tomato 613,
FAO, F. (2014). Food and agriculture organization of the United Nations. Rome, URL: http://faostat. fao. org.
FAO, F. (2021). Food and agriculture organization of the United Nations. Rome, URL: http://faostat. fao. org.
Greenwood, D., Lemaire, G., Gosse, G., Cruz, P., Draycott, A., & Neeteson, J. (1990). Decline in percentage N of C3 and C4 crops with increasing plant mass. Annals of botany, 66(4), 425-436.
Hassan, A. (1991). Fundamentals of plant breeding. Arabic chamber for publication and Distribution, Cairo, Egypt.
Hayslip, N. (1974). A plug-mix'seeding method for field planting tomatoes and other small-seeded hill crops. Univ. of Fla., Fort Pierce ARC Mimeo Rep.
Hochmuth, G. J. (1988). Tomato production guide for Florida.
Ibrahim, D. M., Mohamed, S. J., & Ahmed, S. M. (2019). Effects of plant density on seed yield and it’s components of two pea (Pisum sativum L.) cultivars under rainfed condition in Sulaimani province. Journal of Kerbala for Agricultural Sciences, 6(1), 36-48.
Irungu, J. (2011). Contribution of horticulture to food security in Kenya. Acta Horticulturae, 911, 27–32.
Juknys, R., Duchovskis, P., Sliesaravičius, A., Šlepetys, J., Januškaitienė, I., Brazaitytė, A., Ramaškevičienė, A., Lazauskas, S., Dėdelienė, K., & Sakalauskaitė, J. (2011). Response of different agricultural plants to elevated CO2 and air temperature. Žemdirbystė (Agriculture), 98(3), 259-266.
Laval-Martin, D. (1979). Physiologie végétale, TP et TD, Danielle Laval-Martin, Paul Mazliak.
Lin, L., Luther, G. C., & Hanson, P. (2015). Raising healthy tomato seedlings. AVRDC–The World Vegetable Center publication, 15-795.
Paul, L. C., & Metzger, J. D. (2005). Impact of vermicompost on vegetable transplant quality. HortScience, 40(7), 2020-2023.
Weston, L. A., & Zandstra, B. H. (1989). Transplant age and N and P nutrition effects on growth and yield of tomatoes. HortScience, 24(1), 88-90.
Yucel, D. O. (2013). Impact of plant density on yield and yield components of pea (Pisum sativum ssp. sativum L.) cultivars. Journal of Agricultural and Biological Science, 8(2), 169-174
- Downloads
- Published
- 2022-12-31
- Issue
- Vol. 37 No. 4 (2022)
- Section
- Articles
- License
-
Copyright (c) 2022 Fayrouz Buojaylah

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Copyright of the articles Published by Almukhtar Journal of Science (MJSc) is retained by the author(s), who grant MJSc a license to publish the article. Authors also grant any third party the right to use the article freely as long as its integrity is maintained and its original authors and cite MJSc as the original publisher. Also, they accept the article remains published by the MJSc website (except in the occasion of a retraction of the article).
How to Cite
Similar Articles
- Rabah Basheer Mohammed Taher, Improving The Properties Of Fresh & Hardened Concrete By Using High Range Water Reducing Admixtures (Super Plasticizers) , Al-Mukhtar Journal of Sciences: Vol. 23 No. 1 (2009)
- Murad M. Aburas, Final infiltration rate as an indicator for soil erodibility prediction , Al-Mukhtar Journal of Sciences: Vol. 27 No. 1 (2012)
- Mohammad S El-Geundi, Assanousi A. Abufares, Adsorption Equilibria of an Insecticide Diazinon onto Natural Clay , Al-Mukhtar Journal of Sciences: Vol. 28 No. 1 (2013)
- Abdulmansaf A Bouzaid, Farag A. M Alwahdi, and Ahmad K. B Almajri, Statistical analysis of the effect of machining parameters on the straightness error of high carbon steel turned components , Al-Mukhtar Journal of Sciences: Vol. 28 No. 2 (2013)
- Rahel.G. Rahel, Measurement of 3D Displacement Fields and Deformation Using 3D Laser Scanner and CCD Camera (0-10 mm) , Al-Mukhtar Journal of Sciences: Vol. 28 No. 2 (2013)
- Fathelrahman I. Elsiddig, Efficacy of different Neem Azadirachta indica organic extracts on mosquitoes Anopheles arabiensis Patton , Al-Mukhtar Journal of Sciences: Vol. 32 No. 2 (2017)
- Hanan Ali Idris , Mohammed Ali Khalifa Omar, Allelopathy effects of Salvia triloba L. on seeds germination of Hordeum vulgane L., Zea mays L., Avena sativa L. and Ceratonia siliqua L. , Al-Mukhtar Journal of Sciences: Vol. 33 No. 1 (2018)
- Ammar A Ammar, Hydrological Spatial Analysis of Wadi Alkuf Catchment Area, Cyrenaica, Northeastern Libya , Al-Mukhtar Journal of Sciences: Vol. 33 No. 3 (2018)
- M. Sharif, M. Reinacher, Histological and immunohistochemical study on granular cell trichoblastoma , Al-Mukhtar Journal of Sciences: Vol. 26 No. 1 (2011)
- Ahmed. F. Elmisteri, Abdelbaset R. H. Midawi, Farag M Shuaeib, Finite Element Simulation of the Instrumented Indentation Test to Estimate the Mechanical Properties for ASTM516-G70 and AISI1010 steels , Al-Mukhtar Journal of Sciences: Vol. 34 No. 3 (2019)
You may also start an advanced similarity search for this article.











